Gestión de residuos sólidos en cadenas de suministro de ciclo cerrado desde la perspectiva de la investigación de operaciones

Gestión de residuos sólidos en cadenas de suministro de ciclo cerrado desde la perspectiva de la investigación de operaciones

La integración de los flujos reversos y directos en la cadena de suministro, trae beneficios al reducir costos y evitar el daño ambiental porque se recupera valor de los residuos sólidos; esta integración se conoce como la cadena de suministro de ciclo cerrado. La mayoría de experiencias que relacionan cadena de suministro de ciclo cerrado y decisiones de gestión de residuos sólidos, provienen de países desarrollados con estrictas regulaciones ambientales y usan técnicas de invetigación de operaciones. El objetivo se este artículo es identificar la factibilidad de aplicar técnicas de investigación de operaciones a las decisiones de gestión de residuos sólidos en las cadena de suministro de ciclo cerrado en países en desarrollo como Colombia... Ver más

Guardado en:

Luna Azul

1909-2474

Marmolejo Rebellón, Luis Fernando

Torres Lozada, Patricia

Vidal Holguín, Carlos Julio

Osorio Gómez, Juan Carlos

Peña Montoya, Claudia Cecilia

UNIVERSIDAD DE CALDAS

10.17151/10.17151/luaz.2015.41.2

2015-07-01

5

28

Colombia

simulación

residuos sólidos

optimización

análisis multicriterio

ciclo cerrado

Cadena de suministro

http://purl.org/coar/access_right/c_abf2

info:eu-repo/semantics/openAccess

Luna Azul - 2015

id 476c2c315bc82ddcdffec418edf2f804
record_format ojs
spelling Gestión de residuos sólidos en cadenas de suministro de ciclo cerrado desde la perspectiva de la investigación de operaciones
Ministerio de Vivienda, Ciudad y Territorio. (2013). Decreto 2981 “Por el cual se reglamenta la prestación del servicio de aseo”. República de Colombia.
Queiruga, D., Walther, G., González-Benito, J. y Spengler, T. (2008). Evaluation of sites for the location of WEEE recycling plants in Spain.Waste Management, 28(1), 181-190.
Pishvaee, M.S., Rabbani, M. y Torabi, S.A. (2011). A robust optimization approach to closed-loop supply chain network design under uncertainty. Applied Mathematical Modelling, 35(2), 637-649.
Pishvaee, M.S., Jolai, F. y Razmi, J. (2009). A stochastic optimization model for integrated forward/reverse logistics network design. Journal of Manufacturing Systems, 28(4), 107-114.
Pires, A., Chang, N.-B. y Martinho, G. (2011). An AHP-based fuzzy interval TOPSIS assessment for sustainable expansion of the solid waste management system in Setúbal Peninsula, Portugal. Resources, Conservation and Recycling, 56(1), 7-21.
Peña Montoya, C.C., Torres Lozada, P., Vidal Holguín, C.J. y Marmolejo Rebellón, L.F. (2013). La logística de reversa y su relación con la gestión integral y sostenible de residuos sólidos en sectores productivos. Revista Entramado, 9(1), 226-238.
Paksoy, T., Bektas, T. y Özceylan, E. (2011). Operational and environmental performance measures in a multi-product closed-loop supply chain. Transportation Research Part E: Logistics and Transportation Review, 47(4), 532-546.
Paksoy, T. y Bektas, T. (2011). Operational and environmental performance measures in amulti-product closed-loop supply chain. Transportation Review. Part E: Logistics and Transportation Review, 47(4), 532-546.
Paksoy, T., Özceylan, E. y Weber, G. (2010). A multi objective model for optimization of a green supply chain network. AIP Conference Proceedings, 1239(1). p. 311.
Özkir, V. y Basligil, H. (2013). Multi-objective optimization of closed-loop supply chains in uncertain environment. Journal of Cleaner Production, 41, 114-125.
Önüt, S. y Soner, S. (2008). Transshipment site selection using the AHP and TOPSIS approaches under fuzzy environment. Waste Management, 28(9), 1552-1559.
Olugu, E.U. y Wong, K.Y. (2012). An expert fuzzy rule-based system for closed-loop supply chain performance assessment in the automotive industry. Expert Systems with Applications, 39(1), 375-384.
Nas, B., Cay, T., Iscan, F. y Berktay, A. (2010). Selection of MSW landfill site for Konya, Turkey using GIS and multi-criteria evaluation. Environmental monitoring and assessment, 160(1-4), 491-500.
Mitra, S. (2012). Inventory management in a two-echelon closed-loop supply chain with correlated demands and returns. Computers & Industrial Engineering, 62(4), 870-879.
Mergias, I., Moustakas, K., Papadopoulos, A. y Loizidou, M. (2007). Multi-criteria decision aid approach for the selection of the best compromise management scheme for ELVs: The case of Cyprus. Journal of Hazardous Materials, 147(3), 706-717.
Rogers, D.S. y Tibben-Lembke, R. S. (1998). Reverse Logistics and the Environment. En RLEC (Ed.), Going Backwards:Reverse Logistics Trends and Practices (pp. 101-136).
Lu, T. y Zhao, X. (2010). Reverse Logistics Network Design with Consideration of Forward and Reverse Facility Integration. Paper presented at the E-Business and E-Government (ICEE).
Liao, C.H. y Chiu, A.S. (2011). Evaluate municipal solid waste management problems using hierarchical framework. Procedia-Social and Behavioral Sciences, 25, 353-362.
Liamsanguan, C. y Gheewala, S.H. (2008). LCA: A decision support tool for environmental assessment of MSW management systems. Journal of Environmental Management, 87 (1), 132-138.
Lee, D.-H., Dong, M. y Bian, W. (2010). The design of sustainable logistics network under uncertainty. International Journal of Production Economics, 128(1), 159-166.
Khan, S. y Faisal, M.N. (2008). An analytic network process model for municipal solid waste disposal options. Waste management, 28(9), 1500-1508.
Khadivi, M.R. y Fatemi Ghomi, S.M.T. (2012). Solid waste facilities location using of analytical network process and data envelopment analysis approaches. Waste management, 32(6), 1258-1265.
Kaya, I. (2012). Evaluation of outsourcing alternatives under fuzzy environment for waste management. Resources, Conservation and Recycling, 60, 107-118.
Karmperis, A.C., Sotirchos, A., Aravossis, K. y Tatsiopoulos, I.P. (2012). Waste management project’s alternatives: A risk-based multi-criteria assessment (RBMCA) approach. Waste management, 32(1), 194-212.
Kannan, G., Sasikumar, P. y Devika, K. (2010). A genetic algorithm approach for solving a closed loop supply chain model: A case of battery recycling. Applied Mathematical Modelling, 34(3), 655-670.
Jianghong, M. (2010). An Integrated Supply Chain Modeling and Simulation Based on System Dynamics. Paper presented at the Management and Service Science (MASS).
Hung, M.L., Ma, H. y Yang, W.F. (2007). A novel sustainable decision making model for municipal solid waste management. Waste Management, 27(2), 209-219.
Herva, M., y Roca, E. (2013). Ranking municipal solid waste treatment alternatives based on ecological footprint and multi-criteria analysis. Ecological Indicators, 25, 77-84.
Granada-Aguirre, L.F. (2009). Gestión ambiental empresarial: Pasado, presente y futuro de las normas e instituciones ambientales en Colombia. Libre Empresa, 6(1), 63-79.
Ramezani, M., Bashiri, M. y Tavakkoli-Moghaddam, R. (2013). A new multi-objective stochastic model for a forward/reverse logistic network design with responsiveness and quality level. Applied Mathematical Modelling, 37(1), 328-344.
Rousis, K., Moustakas, K., Malamis, S., Papadopoulos, A. y Loizidou, M. (2008). Multi-criteria analysis for the determination of the best WEEE management scenario in Cyprus. Waste Management, 28(10), 1941-1954.
Gomes-Salema, M.I., Barbosa-Povoa, A.P. y Novais, A.Q. (2007). An optimization model for the design of a capacitated multi-product reverse logistics network with uncertainty. European Journal of Operational Research, 179(3), 1063-1077.
Wang, L. y Murata T. (2011). Study of Optimal Capacity Planning for Remanufacturing Activities in Closed-Loop Supply Chain using System Dynamics Modeling Proceeding of the IEEE International Conference on Automation and Logistics Chongqing, China.
Text
http://purl.org/coar/access_right/c_abf2
info:eu-repo/semantics/openAccess
http://purl.org/coar/version/c_970fb48d4fbd8a85
info:eu-repo/semantics/publishedVersion
http://purl.org/coar/resource_type/c_6501
info:eu-repo/semantics/article
Zhou, Y. y Wang, S. (2008). Generic model of reverse logistics network design. Journal of Transportation Systems Engineering and Information Technology, 8(3), 71-78.
Zhang, G. y Amin, S.H. (2011). Network design of a closed-loop supply chain with uncertain demand and return. In Service Operations, Logistics, and Informatics (SOLI), 376-379.
Zeballos, L.J., Gomes, M.I., Barbosa-Povoa, A.P. y Novais, A.Q. (2012). Addressing the uncertain quality and quantity of returns in closed-loop supply chains. Computers & Chemical Engineering, 47, 237-247.
Yeomans, J.S. (2007). Solid waste planning under uncertainty using evolutionary simulation-optimization. Socio-Economic Planning Sciences, 41(1), 38-60.
Xianfeng, L., Jianwei, Q. y Meilian, L. (2010). Design and simulation WEEE reverse logistics network in Guangxi. Paper presented at the Optoelectronics and Image Processing (ICOIP).
Xi, B.D., Su, J., Huang, G.H., Qin, X.S., Jiang, Y.H., Huo, S.L. y Yao, B. (2010). An integrated optimization approach and multi-criteria decision analysis for supporting the waste-management system of the City of Beijing, China. Engineering Applications of Artificial Intelligence, 23(4), 620-631.
Wang, F., Lai, X. y Shi, N. (2011). A multi-objective optimization for green supply chain network design. Decision Support Systems, 51(2), 262-269.
Roussat, N., Dujet, C. y Mehu, J. (2009). Choosing a sustainable demolition waste management strategy using multicriteria decision analysis. Waste Management, 29(1), 12-20.
Vlachos, D., Georgiadis, P. y Iakovou, E. (2007). A system dynamics model for dynamic capacity planning of remanufacturing in closed-loop supply chains. Computers & Operations Research, 34, 367-394.
Vego, G., Kucar-Dragicevic, S. y Koprivanac, N. (2008). Application of multi-criteria decision-making on strategic municipal solid waste management in Dalmatia, Croatia. Waste Management, 28(11), 2192-2201
Ulukan, H.Z. y Kop, Y. (2009). Multi-criteria decision making (MCDM) of solid waste collection methods using life cycle assessment (LCA) outputs. In Computers & Industrial Engineering, 2009. CIE 2009. pp. 584-589.
Thiell, M., Soto, J.P., Madiedo, J.P. y van Hoof, B. (2011). Green Logistics: Global Practices and their Implementation in Emerging Markets. Green Finance and Sustainability. Business Science Reference, 334-357.
Talbot, S., Lefebvre, É. y Lefebvre, L. (2007). Closed-loop supply chain activities and derived benefits in manufacturing SMEs. Journal of Manufacturing Technology Management, 18(6), 627-658.
Tako, A. y Robinson, S. (2012). The application of discrete event simulation and system dynamics in the logistics and supply chain context. Decision Support Systems, 52(4), 802-815.
Su, J.P., Chiueh, P.T., Hung, M.L. y Ma, H.W. (2007). Analyzing policy impact potential for municipal solid waste management decision-making: A case study of Taiwan. Resources, Conservation and Recycling, 51(2), 418-434.
Stindt, D. y Sahamie, R. (2014). Review of research on closed loop supply chain management in the process industry. Flexible Services and Manufacturing Journal, 26(1-2), 268-293.
Spengler, T. y Schröter, M. (2003). Special Section: Closed-Loop Supply Chains: Practice and Potential: Strategic Management of Spare Parts in Closed-Loop Supply Chains - A System Dynamics Approach. Interfaces, 33, 7-17.
Souza, G.C. (2013). Closed Loop Supply Chains: A Critical Review, and Future Research. Decision Sciences, 44(1), 7-38.
Soma, M., Kondoh, S. y Umeda, Y (2003). Simulation of closed-loop manufacturing systems focused on material balances in Environmentally Conscious Design and Inverse Manufacturing. EcoDesign '03. pp. 95-101.
Shi, Y., Wang, J. y Xiao, S. (2010). Research on reverse logistics network design for television remanufacturing based on operation research method and simulation. Paper presented at the 2010 IEEE 17th International Conference on Industrial Engineering and Engineering Management.
Shapiro, J.F. (2007). Modeling the supply chain. Vol. 2. Cengage Learning.
Senthil, S., Srirangacharyulu, B. y Ramesh, A. (2012). A decision making methodology for the selection of reverse logistics operating channels. Procedia Engineering, 38, 418-428.
________. (2010). Simultaneous design and planning of supply chains with reverse flows: A generic modelling framework. European journal of operational research, 203(2), 336-349.
Georgiadis, P. y Besiou, M. (2008). Sustainability in electrical and electronic equipment closed-loop supply chains: A System Dynamics approach, Journal of Cleaner Production, 16, 1665-1678.
Garfi, M., Tondelli, S. y Bonoli, A. (2009). Multi-criteria decision analysis for waste management in Saharawi refugee camps. Waste management, 29(10), 2729-2739.
simulación
https://creativecommons.org/licenses/by-nc-sa/4.0/
Español
https://revistasojs.ucaldas.edu.co/index.php/lunazul/article/view/1251
Luna Azul
Universidad de Caldas
application/pdf
Artículo de revista
Núm. 41 , Año 2015 : Julio - Diciembre
41
residuos sólidos
Achillas, C., Vlachokostas, C., Aidonis, D., Moussiopoulos, Iakovou, E. y Banias, G. (2010). Optimising reverse logistics network to support policy-making in the case of Electrical and Electronic Equipment. Waste Management, 30(12), 2592-2600.
optimización
análisis multicriterio
ciclo cerrado
Cadena de suministro
Marmolejo Rebellón, Luis Fernando
Torres Lozada, Patricia
Vidal Holguín, Carlos Julio
Osorio Gómez, Juan Carlos
Peña Montoya, Claudia Cecilia
La integración de los flujos reversos y directos en la cadena de suministro, trae beneficios al reducir costos y evitar el daño ambiental porque se recupera valor de los residuos sólidos; esta integración se conoce como la cadena de suministro de ciclo cerrado. La mayoría de experiencias que relacionan cadena de suministro de ciclo cerrado y decisiones de gestión de residuos sólidos, provienen de países desarrollados con estrictas regulaciones ambientales y usan técnicas de invetigación de operaciones. El objetivo se este artículo es identificar la factibilidad de aplicar técnicas de investigación de operaciones a las decisiones de gestión de residuos sólidos en las cadena de suministro de ciclo cerrado en países en desarrollo como Colombia. Se identificaron variables importantes de los articulos revisados tales como los diferentes tipos de residuos, las regiones y el uso de técnicas de optmización, simulación y multicriterio. La metodología de vigilancia tecnológica se uso para correlacionar estas variables. Los resultados mostraron que la técnica de multicriterio es usada con más frecuencia porque permite la consideración de varios aspectos en una misma decisión; por lo tanto, el uso de esta técnica sería conveniente para enfrentar efectivamente las principales decisiones en las incipientes cadenas de suministro de ciclo cerrado en países en desarrollo.
Luna Azul - 2015
Publication
Achillas, C., Moussiopoulos, N., Karagiannidis, A., Banias, G. y Perkoulidis, G. (2013). The use of multi-criteria decision analysis to tackle waste management problems: a literature review. Waste Management & Research, 31(2), 115-129.
Biehl, M., Prater, E. y Realff, M.J. (2007). Assessing performance and uncertainty in developing carpet reverse logistics systems. Computers & Operations Research, 34(2), 443-463.
Dale, R., Melamed, B. y Lembke, R. (2012). Modeling and Analysis of Reverse Logistics. Journal of Business Logistics, 33(2), 107-117.
De Brito, M.P. y van der Laan, E. A. (2010). Supply Chain Management and Sustainability: Procrastinating Integration in Mainstream Research. Sustainability, 2(4), 859-870.
Amin, S.H. y Zhang, G. (2012a). An integrated model for closed-loop supply chain configuration and supplier selection: Multi-objective approach. Expert Systems with Applications, 39(8), 6782-6791.
Chang, N.B., Parvathinathan, G. y Breeden, J.B. (2008). Combining GIS with fuzzy multicriteria decision-making for landfill siting in a fast-growing urban region. Journal of environmental management, 87(1), 139-153
Casas, J.J. y Cerón, K. (2013). Método cuantitativo para la configuración de la cadena de logística inversa de un tipo de residuo de aparato eléctrico o electrónico. Trabajo de grado, Ingeniería Industrial, Universidad del Valle. Cali.
Bollinger, D. y Pictet, J. (2008). Multiple criteria decision analysis of treatment and land- filling technologies for waste incineration residues. Omega, 36(3), 418-428.
Demirel, N.Ö. y Gökçen, H. (2008). A mixed integer programming model for remanufacturing in reverse logistics environment. The International Journal of Advanced Manufacturing Technology, 39(11-12), 1197-1206.
Dhouib, D. y Elloumi, S. (2011). A new multi-criteria approach dealing with dependent and heterogeneous criteria for end-of-life product strategy. Applied Mathematics and Computation, 218(5), 1668-1681.
Ekmekçioglu, M., Kaya, T. y Kahraman, C. (2010). Fuzzy multicriteria disposal method and site selection for municipal solid waste. Waste Management, 30(8), 1729 -1736.
Escorsa, P. y Maspons, R. (2001). De la vigilancia tecnológica a las inteligencia competitiva. Madrid: Ed. Financial Times - Prentice Hall (Grupo Pearson).
Besiou, M., Georgiadis, P. y Van Wassenhove, L. N. (2012). Official recycling and scavengers: Symbiotic or conflicting? European Journal of Operational Research, 218(2), 563-576.
Chen, C.T., Lin, C.T. y Huang, S.F. (2006). A fuzzy approach for supplier evaluation and selection in supply chain management. International journal of production economics, 102(2), 289-301.
Barker, T.J. y Zabinsky, Z.B. (2011). A multicriteria decision making model for reverse logistics using analytical hierarchy process. Omega, 39(5), 558-573.
Ferguson, M.E. y Souza, G.C. (2010). Closed-loop supply chains: new developments to improve the sustainability of business practices. CRC Press.
Banar, M., Özkan, A. y Kulaç, A. (2010). Choosing a recycling system using ANP and ELECTRE III techniques. Turkish J Eng Env Sci, 34, 145-154.
Figueira, J., Greco, S. y Ehrgott, M. (2005). Multiple criteria decision analysis: state of the art surveys. Vol. 78. Springer.
Fleischmann, M., Krikke, H.R., Dekker, R. y Flapper, S.D.P. (2000). A characterisation of logistics networks for product recovery. Omega, 28(6), 653-666.
Aragonés-Beltrán, P., Pastor-Ferrando, J. P., García-García, F. y Pascual-Agulló, A. (2010). An analytic network process approach for siting a municipal solid waste plant in the metropolitan area of Valencia (Spain). Journal of Environmental Management, 91(5), 1071-1086.
Amin, S.H. y Zhang, G. (2013). A multi-objective facility location model for closed-loop supply chain network under uncertain demand and return. Applied Mathematical Modelling, 37(6), 4165-4176.
________. (2012b). A proposed mathematical model for closed-loop network configuration based on product life cycle, The International Journal of Advanced Manufacturing Technology, 58, 791-801.
Fröhling, M., Schwaderer, F., Bartusch, H. y Rentz, O. Integrated planning of transportation and recycling for multiple plants based on process simulation. European Journal of Operational Research, 207, 958-970.
Contreras, F., Hanaki, K., Aramaki, T. y Connors, S. (2008). Application of analytical hierarchy process to analyze stakeholders preferences for municipal solid waste management plans, Boston, USA. Resources, Conservation and Recycling, 52(7), 979-991.
The integration of reverse and direct flows within the supply chain is highly benefitial to reduce costs and avoid the enviromental damage because value from the solid waste is recovered; this integration is known as closed-loop supply chain. Most of the reported experiences regarding closed-loop supply chains and solid waste management decisions come from developed countries with strict environmental regulations and use of operations research techniques.This paper aims to identify the feasibility of applying operations research techniques to solid waste magement decisions within closed-loop supply chains in developing countries such as Colombia. Important variables such as the different kinds of solid waste, the regions and the use of optimization, simulation and multi-criteria techniques were identified by reviewing research articles. Technologic watch methodology was used to correlate these variables. The results showed that the multi-criteria technique is most frequently used because it allows including different aspects related to a single decision; therefore, the use of this technique would be appropiate to effectively approach the main decisions at the emerging closed-loop supply chains in developing countries.
simulation
Supply chain
closed loop
multicriteria analysis
optimization
solid waste
Journal article
Solid waste management in closed-loop supply chains from the perspective of operations research
2015-07-01T00:00:00Z
https://revistasojs.ucaldas.edu.co/index.php/lunazul/article/download/1251/1174
2015-07-01T00:00:00Z
2015-07-01
1909-2474
https://doi.org/10.17151/10.17151/luaz.2015.41.2
5
28
10.17151/10.17151/luaz.2015.41.2
institution UNIVERSIDAD DE CALDAS
thumbnail https://nuevo.metarevistas.org/UNIVERSIDADDECALDAS/logo.png
country_str Colombia
collection Luna Azul
title Gestión de residuos sólidos en cadenas de suministro de ciclo cerrado desde la perspectiva de la investigación de operaciones
spellingShingle Gestión de residuos sólidos en cadenas de suministro de ciclo cerrado desde la perspectiva de la investigación de operaciones
Marmolejo Rebellón, Luis Fernando
Torres Lozada, Patricia
Vidal Holguín, Carlos Julio
Osorio Gómez, Juan Carlos
Peña Montoya, Claudia Cecilia
simulación
residuos sólidos
optimización
análisis multicriterio
ciclo cerrado
Cadena de suministro
simulation
Supply chain
closed loop
multicriteria analysis
optimization
solid waste
title_short Gestión de residuos sólidos en cadenas de suministro de ciclo cerrado desde la perspectiva de la investigación de operaciones
title_full Gestión de residuos sólidos en cadenas de suministro de ciclo cerrado desde la perspectiva de la investigación de operaciones
title_fullStr Gestión de residuos sólidos en cadenas de suministro de ciclo cerrado desde la perspectiva de la investigación de operaciones
title_full_unstemmed Gestión de residuos sólidos en cadenas de suministro de ciclo cerrado desde la perspectiva de la investigación de operaciones
title_sort gestión de residuos sólidos en cadenas de suministro de ciclo cerrado desde la perspectiva de la investigación de operaciones
title_eng Solid waste management in closed-loop supply chains from the perspective of operations research
description La integración de los flujos reversos y directos en la cadena de suministro, trae beneficios al reducir costos y evitar el daño ambiental porque se recupera valor de los residuos sólidos; esta integración se conoce como la cadena de suministro de ciclo cerrado. La mayoría de experiencias que relacionan cadena de suministro de ciclo cerrado y decisiones de gestión de residuos sólidos, provienen de países desarrollados con estrictas regulaciones ambientales y usan técnicas de invetigación de operaciones. El objetivo se este artículo es identificar la factibilidad de aplicar técnicas de investigación de operaciones a las decisiones de gestión de residuos sólidos en las cadena de suministro de ciclo cerrado en países en desarrollo como Colombia. Se identificaron variables importantes de los articulos revisados tales como los diferentes tipos de residuos, las regiones y el uso de técnicas de optmización, simulación y multicriterio. La metodología de vigilancia tecnológica se uso para correlacionar estas variables. Los resultados mostraron que la técnica de multicriterio es usada con más frecuencia porque permite la consideración de varios aspectos en una misma decisión; por lo tanto, el uso de esta técnica sería conveniente para enfrentar efectivamente las principales decisiones en las incipientes cadenas de suministro de ciclo cerrado en países en desarrollo.
description_eng The integration of reverse and direct flows within the supply chain is highly benefitial to reduce costs and avoid the enviromental damage because value from the solid waste is recovered; this integration is known as closed-loop supply chain. Most of the reported experiences regarding closed-loop supply chains and solid waste management decisions come from developed countries with strict environmental regulations and use of operations research techniques.This paper aims to identify the feasibility of applying operations research techniques to solid waste magement decisions within closed-loop supply chains in developing countries such as Colombia. Important variables such as the different kinds of solid waste, the regions and the use of optimization, simulation and multi-criteria techniques were identified by reviewing research articles. Technologic watch methodology was used to correlate these variables. The results showed that the multi-criteria technique is most frequently used because it allows including different aspects related to a single decision; therefore, the use of this technique would be appropiate to effectively approach the main decisions at the emerging closed-loop supply chains in developing countries.
author Marmolejo Rebellón, Luis Fernando
Torres Lozada, Patricia
Vidal Holguín, Carlos Julio
Osorio Gómez, Juan Carlos
Peña Montoya, Claudia Cecilia
author_facet Marmolejo Rebellón, Luis Fernando
Torres Lozada, Patricia
Vidal Holguín, Carlos Julio
Osorio Gómez, Juan Carlos
Peña Montoya, Claudia Cecilia
topicspa_str_mv simulación
residuos sólidos
optimización
análisis multicriterio
ciclo cerrado
Cadena de suministro
topic simulación
residuos sólidos
optimización
análisis multicriterio
ciclo cerrado
Cadena de suministro
simulation
Supply chain
closed loop
multicriteria analysis
optimization
solid waste
topic_facet simulación
residuos sólidos
optimización
análisis multicriterio
ciclo cerrado
Cadena de suministro
simulation
Supply chain
closed loop
multicriteria analysis
optimization
solid waste
citationissue 41
citationedition Núm. 41 , Año 2015 : Julio - Diciembre
publisher Universidad de Caldas
ispartofjournal Luna Azul
source https://revistasojs.ucaldas.edu.co/index.php/lunazul/article/view/1251
language Español
format Article
rights http://purl.org/coar/access_right/c_abf2
info:eu-repo/semantics/openAccess
https://creativecommons.org/licenses/by-nc-sa/4.0/
Luna Azul - 2015
references Ministerio de Vivienda, Ciudad y Territorio. (2013). Decreto 2981 “Por el cual se reglamenta la prestación del servicio de aseo”. República de Colombia.
Queiruga, D., Walther, G., González-Benito, J. y Spengler, T. (2008). Evaluation of sites for the location of WEEE recycling plants in Spain.Waste Management, 28(1), 181-190.
Pishvaee, M.S., Rabbani, M. y Torabi, S.A. (2011). A robust optimization approach to closed-loop supply chain network design under uncertainty. Applied Mathematical Modelling, 35(2), 637-649.
Pishvaee, M.S., Jolai, F. y Razmi, J. (2009). A stochastic optimization model for integrated forward/reverse logistics network design. Journal of Manufacturing Systems, 28(4), 107-114.
Pires, A., Chang, N.-B. y Martinho, G. (2011). An AHP-based fuzzy interval TOPSIS assessment for sustainable expansion of the solid waste management system in Setúbal Peninsula, Portugal. Resources, Conservation and Recycling, 56(1), 7-21.
Peña Montoya, C.C., Torres Lozada, P., Vidal Holguín, C.J. y Marmolejo Rebellón, L.F. (2013). La logística de reversa y su relación con la gestión integral y sostenible de residuos sólidos en sectores productivos. Revista Entramado, 9(1), 226-238.
Paksoy, T., Bektas, T. y Özceylan, E. (2011). Operational and environmental performance measures in a multi-product closed-loop supply chain. Transportation Research Part E: Logistics and Transportation Review, 47(4), 532-546.
Paksoy, T. y Bektas, T. (2011). Operational and environmental performance measures in amulti-product closed-loop supply chain. Transportation Review. Part E: Logistics and Transportation Review, 47(4), 532-546.
Paksoy, T., Özceylan, E. y Weber, G. (2010). A multi objective model for optimization of a green supply chain network. AIP Conference Proceedings, 1239(1). p. 311.
Özkir, V. y Basligil, H. (2013). Multi-objective optimization of closed-loop supply chains in uncertain environment. Journal of Cleaner Production, 41, 114-125.
Önüt, S. y Soner, S. (2008). Transshipment site selection using the AHP and TOPSIS approaches under fuzzy environment. Waste Management, 28(9), 1552-1559.
Olugu, E.U. y Wong, K.Y. (2012). An expert fuzzy rule-based system for closed-loop supply chain performance assessment in the automotive industry. Expert Systems with Applications, 39(1), 375-384.
Nas, B., Cay, T., Iscan, F. y Berktay, A. (2010). Selection of MSW landfill site for Konya, Turkey using GIS and multi-criteria evaluation. Environmental monitoring and assessment, 160(1-4), 491-500.
Mitra, S. (2012). Inventory management in a two-echelon closed-loop supply chain with correlated demands and returns. Computers & Industrial Engineering, 62(4), 870-879.
Mergias, I., Moustakas, K., Papadopoulos, A. y Loizidou, M. (2007). Multi-criteria decision aid approach for the selection of the best compromise management scheme for ELVs: The case of Cyprus. Journal of Hazardous Materials, 147(3), 706-717.
Rogers, D.S. y Tibben-Lembke, R. S. (1998). Reverse Logistics and the Environment. En RLEC (Ed.), Going Backwards:Reverse Logistics Trends and Practices (pp. 101-136).
Lu, T. y Zhao, X. (2010). Reverse Logistics Network Design with Consideration of Forward and Reverse Facility Integration. Paper presented at the E-Business and E-Government (ICEE).
Liao, C.H. y Chiu, A.S. (2011). Evaluate municipal solid waste management problems using hierarchical framework. Procedia-Social and Behavioral Sciences, 25, 353-362.
Liamsanguan, C. y Gheewala, S.H. (2008). LCA: A decision support tool for environmental assessment of MSW management systems. Journal of Environmental Management, 87 (1), 132-138.
Lee, D.-H., Dong, M. y Bian, W. (2010). The design of sustainable logistics network under uncertainty. International Journal of Production Economics, 128(1), 159-166.
Khan, S. y Faisal, M.N. (2008). An analytic network process model for municipal solid waste disposal options. Waste management, 28(9), 1500-1508.
Khadivi, M.R. y Fatemi Ghomi, S.M.T. (2012). Solid waste facilities location using of analytical network process and data envelopment analysis approaches. Waste management, 32(6), 1258-1265.
Kaya, I. (2012). Evaluation of outsourcing alternatives under fuzzy environment for waste management. Resources, Conservation and Recycling, 60, 107-118.
Karmperis, A.C., Sotirchos, A., Aravossis, K. y Tatsiopoulos, I.P. (2012). Waste management project’s alternatives: A risk-based multi-criteria assessment (RBMCA) approach. Waste management, 32(1), 194-212.
Kannan, G., Sasikumar, P. y Devika, K. (2010). A genetic algorithm approach for solving a closed loop supply chain model: A case of battery recycling. Applied Mathematical Modelling, 34(3), 655-670.
Jianghong, M. (2010). An Integrated Supply Chain Modeling and Simulation Based on System Dynamics. Paper presented at the Management and Service Science (MASS).
Hung, M.L., Ma, H. y Yang, W.F. (2007). A novel sustainable decision making model for municipal solid waste management. Waste Management, 27(2), 209-219.
Herva, M., y Roca, E. (2013). Ranking municipal solid waste treatment alternatives based on ecological footprint and multi-criteria analysis. Ecological Indicators, 25, 77-84.
Granada-Aguirre, L.F. (2009). Gestión ambiental empresarial: Pasado, presente y futuro de las normas e instituciones ambientales en Colombia. Libre Empresa, 6(1), 63-79.
Ramezani, M., Bashiri, M. y Tavakkoli-Moghaddam, R. (2013). A new multi-objective stochastic model for a forward/reverse logistic network design with responsiveness and quality level. Applied Mathematical Modelling, 37(1), 328-344.
Rousis, K., Moustakas, K., Malamis, S., Papadopoulos, A. y Loizidou, M. (2008). Multi-criteria analysis for the determination of the best WEEE management scenario in Cyprus. Waste Management, 28(10), 1941-1954.
Gomes-Salema, M.I., Barbosa-Povoa, A.P. y Novais, A.Q. (2007). An optimization model for the design of a capacitated multi-product reverse logistics network with uncertainty. European Journal of Operational Research, 179(3), 1063-1077.
Wang, L. y Murata T. (2011). Study of Optimal Capacity Planning for Remanufacturing Activities in Closed-Loop Supply Chain using System Dynamics Modeling Proceeding of the IEEE International Conference on Automation and Logistics Chongqing, China.
Zhou, Y. y Wang, S. (2008). Generic model of reverse logistics network design. Journal of Transportation Systems Engineering and Information Technology, 8(3), 71-78.
Zhang, G. y Amin, S.H. (2011). Network design of a closed-loop supply chain with uncertain demand and return. In Service Operations, Logistics, and Informatics (SOLI), 376-379.
Zeballos, L.J., Gomes, M.I., Barbosa-Povoa, A.P. y Novais, A.Q. (2012). Addressing the uncertain quality and quantity of returns in closed-loop supply chains. Computers & Chemical Engineering, 47, 237-247.
Yeomans, J.S. (2007). Solid waste planning under uncertainty using evolutionary simulation-optimization. Socio-Economic Planning Sciences, 41(1), 38-60.
Xianfeng, L., Jianwei, Q. y Meilian, L. (2010). Design and simulation WEEE reverse logistics network in Guangxi. Paper presented at the Optoelectronics and Image Processing (ICOIP).
Xi, B.D., Su, J., Huang, G.H., Qin, X.S., Jiang, Y.H., Huo, S.L. y Yao, B. (2010). An integrated optimization approach and multi-criteria decision analysis for supporting the waste-management system of the City of Beijing, China. Engineering Applications of Artificial Intelligence, 23(4), 620-631.
Wang, F., Lai, X. y Shi, N. (2011). A multi-objective optimization for green supply chain network design. Decision Support Systems, 51(2), 262-269.
Roussat, N., Dujet, C. y Mehu, J. (2009). Choosing a sustainable demolition waste management strategy using multicriteria decision analysis. Waste Management, 29(1), 12-20.
Vlachos, D., Georgiadis, P. y Iakovou, E. (2007). A system dynamics model for dynamic capacity planning of remanufacturing in closed-loop supply chains. Computers & Operations Research, 34, 367-394.
Vego, G., Kucar-Dragicevic, S. y Koprivanac, N. (2008). Application of multi-criteria decision-making on strategic municipal solid waste management in Dalmatia, Croatia. Waste Management, 28(11), 2192-2201
Ulukan, H.Z. y Kop, Y. (2009). Multi-criteria decision making (MCDM) of solid waste collection methods using life cycle assessment (LCA) outputs. In Computers & Industrial Engineering, 2009. CIE 2009. pp. 584-589.
Thiell, M., Soto, J.P., Madiedo, J.P. y van Hoof, B. (2011). Green Logistics: Global Practices and their Implementation in Emerging Markets. Green Finance and Sustainability. Business Science Reference, 334-357.
Talbot, S., Lefebvre, É. y Lefebvre, L. (2007). Closed-loop supply chain activities and derived benefits in manufacturing SMEs. Journal of Manufacturing Technology Management, 18(6), 627-658.
Tako, A. y Robinson, S. (2012). The application of discrete event simulation and system dynamics in the logistics and supply chain context. Decision Support Systems, 52(4), 802-815.
Su, J.P., Chiueh, P.T., Hung, M.L. y Ma, H.W. (2007). Analyzing policy impact potential for municipal solid waste management decision-making: A case study of Taiwan. Resources, Conservation and Recycling, 51(2), 418-434.
Stindt, D. y Sahamie, R. (2014). Review of research on closed loop supply chain management in the process industry. Flexible Services and Manufacturing Journal, 26(1-2), 268-293.
Spengler, T. y Schröter, M. (2003). Special Section: Closed-Loop Supply Chains: Practice and Potential: Strategic Management of Spare Parts in Closed-Loop Supply Chains - A System Dynamics Approach. Interfaces, 33, 7-17.
Souza, G.C. (2013). Closed Loop Supply Chains: A Critical Review, and Future Research. Decision Sciences, 44(1), 7-38.
Soma, M., Kondoh, S. y Umeda, Y (2003). Simulation of closed-loop manufacturing systems focused on material balances in Environmentally Conscious Design and Inverse Manufacturing. EcoDesign '03. pp. 95-101.
Shi, Y., Wang, J. y Xiao, S. (2010). Research on reverse logistics network design for television remanufacturing based on operation research method and simulation. Paper presented at the 2010 IEEE 17th International Conference on Industrial Engineering and Engineering Management.
Shapiro, J.F. (2007). Modeling the supply chain. Vol. 2. Cengage Learning.
Senthil, S., Srirangacharyulu, B. y Ramesh, A. (2012). A decision making methodology for the selection of reverse logistics operating channels. Procedia Engineering, 38, 418-428.
________. (2010). Simultaneous design and planning of supply chains with reverse flows: A generic modelling framework. European journal of operational research, 203(2), 336-349.
Georgiadis, P. y Besiou, M. (2008). Sustainability in electrical and electronic equipment closed-loop supply chains: A System Dynamics approach, Journal of Cleaner Production, 16, 1665-1678.
Garfi, M., Tondelli, S. y Bonoli, A. (2009). Multi-criteria decision analysis for waste management in Saharawi refugee camps. Waste management, 29(10), 2729-2739.
Achillas, C., Vlachokostas, C., Aidonis, D., Moussiopoulos, Iakovou, E. y Banias, G. (2010). Optimising reverse logistics network to support policy-making in the case of Electrical and Electronic Equipment. Waste Management, 30(12), 2592-2600.
Achillas, C., Moussiopoulos, N., Karagiannidis, A., Banias, G. y Perkoulidis, G. (2013). The use of multi-criteria decision analysis to tackle waste management problems: a literature review. Waste Management & Research, 31(2), 115-129.
Biehl, M., Prater, E. y Realff, M.J. (2007). Assessing performance and uncertainty in developing carpet reverse logistics systems. Computers & Operations Research, 34(2), 443-463.
Dale, R., Melamed, B. y Lembke, R. (2012). Modeling and Analysis of Reverse Logistics. Journal of Business Logistics, 33(2), 107-117.
De Brito, M.P. y van der Laan, E. A. (2010). Supply Chain Management and Sustainability: Procrastinating Integration in Mainstream Research. Sustainability, 2(4), 859-870.
Amin, S.H. y Zhang, G. (2012a). An integrated model for closed-loop supply chain configuration and supplier selection: Multi-objective approach. Expert Systems with Applications, 39(8), 6782-6791.
Chang, N.B., Parvathinathan, G. y Breeden, J.B. (2008). Combining GIS with fuzzy multicriteria decision-making for landfill siting in a fast-growing urban region. Journal of environmental management, 87(1), 139-153
Casas, J.J. y Cerón, K. (2013). Método cuantitativo para la configuración de la cadena de logística inversa de un tipo de residuo de aparato eléctrico o electrónico. Trabajo de grado, Ingeniería Industrial, Universidad del Valle. Cali.
Bollinger, D. y Pictet, J. (2008). Multiple criteria decision analysis of treatment and land- filling technologies for waste incineration residues. Omega, 36(3), 418-428.
Demirel, N.Ö. y Gökçen, H. (2008). A mixed integer programming model for remanufacturing in reverse logistics environment. The International Journal of Advanced Manufacturing Technology, 39(11-12), 1197-1206.
Dhouib, D. y Elloumi, S. (2011). A new multi-criteria approach dealing with dependent and heterogeneous criteria for end-of-life product strategy. Applied Mathematics and Computation, 218(5), 1668-1681.
Ekmekçioglu, M., Kaya, T. y Kahraman, C. (2010). Fuzzy multicriteria disposal method and site selection for municipal solid waste. Waste Management, 30(8), 1729 -1736.
Escorsa, P. y Maspons, R. (2001). De la vigilancia tecnológica a las inteligencia competitiva. Madrid: Ed. Financial Times - Prentice Hall (Grupo Pearson).
Besiou, M., Georgiadis, P. y Van Wassenhove, L. N. (2012). Official recycling and scavengers: Symbiotic or conflicting? European Journal of Operational Research, 218(2), 563-576.
Chen, C.T., Lin, C.T. y Huang, S.F. (2006). A fuzzy approach for supplier evaluation and selection in supply chain management. International journal of production economics, 102(2), 289-301.
Barker, T.J. y Zabinsky, Z.B. (2011). A multicriteria decision making model for reverse logistics using analytical hierarchy process. Omega, 39(5), 558-573.
Ferguson, M.E. y Souza, G.C. (2010). Closed-loop supply chains: new developments to improve the sustainability of business practices. CRC Press.
Banar, M., Özkan, A. y Kulaç, A. (2010). Choosing a recycling system using ANP and ELECTRE III techniques. Turkish J Eng Env Sci, 34, 145-154.
Figueira, J., Greco, S. y Ehrgott, M. (2005). Multiple criteria decision analysis: state of the art surveys. Vol. 78. Springer.
Fleischmann, M., Krikke, H.R., Dekker, R. y Flapper, S.D.P. (2000). A characterisation of logistics networks for product recovery. Omega, 28(6), 653-666.
Aragonés-Beltrán, P., Pastor-Ferrando, J. P., García-García, F. y Pascual-Agulló, A. (2010). An analytic network process approach for siting a municipal solid waste plant in the metropolitan area of Valencia (Spain). Journal of Environmental Management, 91(5), 1071-1086.
Amin, S.H. y Zhang, G. (2013). A multi-objective facility location model for closed-loop supply chain network under uncertain demand and return. Applied Mathematical Modelling, 37(6), 4165-4176.
________. (2012b). A proposed mathematical model for closed-loop network configuration based on product life cycle, The International Journal of Advanced Manufacturing Technology, 58, 791-801.
Fröhling, M., Schwaderer, F., Bartusch, H. y Rentz, O. Integrated planning of transportation and recycling for multiple plants based on process simulation. European Journal of Operational Research, 207, 958-970.
Contreras, F., Hanaki, K., Aramaki, T. y Connors, S. (2008). Application of analytical hierarchy process to analyze stakeholders preferences for municipal solid waste management plans, Boston, USA. Resources, Conservation and Recycling, 52(7), 979-991.
type_driver info:eu-repo/semantics/article
type_coar http://purl.org/coar/resource_type/c_6501
type_version info:eu-repo/semantics/publishedVersion
type_coarversion http://purl.org/coar/version/c_970fb48d4fbd8a85
type_content Text
publishDate 2015-07-01
date_accessioned 2015-07-01T00:00:00Z
date_available 2015-07-01T00:00:00Z
url https://revistasojs.ucaldas.edu.co/index.php/lunazul/article/view/1251
url_doi https://doi.org/10.17151/10.17151/luaz.2015.41.2
eissn 1909-2474
doi 10.17151/10.17151/luaz.2015.41.2
citationstartpage 5
citationendpage 28
url2_str_mv https://revistasojs.ucaldas.edu.co/index.php/lunazul/article/download/1251/1174
_version_ 1797158276112056320

Código QR

Estadísticas y Métricas Alternativas

Títulos similares